Removing one of the feet locking nuts on LG washing machine

[ElCI]

Hi all

Was looking today at an LG washing machine, its slightly too high for my (abnormally low) under counter recess but I noticed it has 2 locking nuts on the feet. This seems overkill and if I can remove 1 of these then it probably fits but just wondering if anyone else has done this? I assume it's physically possible to fully remove the feet from the machine, remove a nut and then reinsert without issue but again would be ideal if anyone has already done this and could confirm

Cheers for any help

 

[Mottie]

You’ve already asked this once before for a different machine. I don’t think you’ll get any different answers.

Removing locking nuts from feet (Bosch washing machine)

Hi all I've moved into a new house recently, for some reason the worktops are lower than average. I need to slot it into a recess with height of around 840mm. I've found a Bosch washing machine that's only slightly more than this. I've checked it in store and there's locking nuts on the...

www.diynot.com

 

[blup]

They adjust the height so unless you want a leaning machine, which is not recommended, the height of the machine will be determined by the non adjusting feet