Replacement blades for Parkside circular saw

[KaraP]

I have a Parkside (PHKS 1300 A1)circular saw and I am looking for replacement blades or an alternative I can use with it? The blade that is provided is good although I find that on thin sheet material it can rough it up too much due to its size. Any help would be greatly appreciated.

 

[joe-90]

You need to know the size of the blade and the size of the hole in the middle. There are loads to choose from when you know that.

 

[Monkeh]

Any 190mm blade with a 30mm bore will fit. Lidl themselves often sell them for only a few quid, they're reasonably good blades for DIY use.

 

[Deluks]

I find that on thin sheet material it can rough it up too much due to its size. Any help would be greatly appreciated.

For a cleaner cut...
Change the depth of cut to just a few mm more than material thickness. You just want about half depth of the blade tips peeking through underneath.

 

[KaraP]

Thanks for the info folks! I will head out and try and grab a replacement blade.