Replacing elements in a creda storage heater

[gubar]

Hi,

I have a creda 79052 with faulty elements (2 of the 3). I have replacement elements.

My question is, can I easily replace these myself? I have opened the heater up and removed some bricks and can see where the elements attach. I have also checked that this model of heater is asbestos free.

I have no electrical knowledge, though would obviously switch of the mains electricity. Hoping that it would just be a matter of unscrewing, removing and replacing.

Will not do anything unless I am advised this is a risk free no-brainer.

thanks,

gubar

 

[Softus]

My question is, can I easily replace these myself?

Yes.

I have no electrical knowledge, though would obviously switch of the mains electricity. Hoping that it would just be a matter of unscrewing, removing and replacing.

It is.

Will not do anything unless I am advised this is a risk free no-brainer.

The risk concerns isolating.

Don't rely on the meter switching times.

Do isolate the circuit you're working on.

Don't assume that you've isolate the correct circuit.

Do have a means of checking for dead on whatever you're working on.

If you find yourself thinking "Oh yeah I'm sure that'll be alright", then stop, 'cos you're wrong.

 

[bernardgreen]

One thing to be carefull about.

Some elements have slide on connectors and may need to have new connectors crimped to the end of the wiring to ensure a good connection.

[/img]

 

[gubar]

Hi,

thanks you for the replies. I don't think this one has crimps (i'll check later to be sure) so don't think that will be a problem.

If I switch of the mains supply in my home - I believe I have then isolated as much as possible and will be safe?

cheers again,

gubar

 

[bernardgreen]

Do the cables from the heaters go to fused and switched outlets next to the heater ? If they do then switch off and remove the fuse while working on the heater as well as turning off the power at the main fuse box.

Then if someone turns the power back on to watch TV you are ( may be ) protected by the removed fuse.

That has happened to people I know, hubby working in loft, wife comes home, "oh dear power has gone off " and she turned the main switch back on. He survived

 

[gubar]

Hello,

I have followed the advice here and succesfully fitted the elements. They charged overnight and all work perfectly.

Thanks to all who posted with help and advice.

cheers

gubar