Reson8 strobe

[Rekusu]

What ho one and all,

I have a Accenta mini Gen4 and Reson8 Bell Box. All works just fine but....!

Recently noticed after the exit beeps, when the strobe should flash a few time, it does not. It used to do so. My guess is the strobe tube needs replacing. Is it worht doing so or just buying a Reson 8 replacement?

Secondly, to the best of my knowledge, the sounder has never needed to use the backup NiCad battery. But it is 15 years old. Should it be replaced or not?

Thanks and toodle pip

 

[sparkymarka]

Try an activating the alarm and let it ring for a minute as strobes need to build up a charge ….if it still doesn’t work replace the whole unit

 

[Rekusu]

Thanks for your reply. I don't know if the strobe works when the alarm is ringing, but it used to give a couple of flashes at the end of the exit count-down.
Regarding it not working, the flash is so weak that behind the blue plastic, it has always been virtually nothing.

 

[Rekusu]

Couple of extra questions. Have been researching for a replacement Reson8 bell box and seems difficult to find these days. Would another make be compatible with the power requirements?

In the control panel instructions, I can apparently opt to test the various items, (walk test, sounder, strobe) But pressing the up button or selecting 2 (strobe) does not show strobe but Fire. Seems there is no Strobe option, which I know not to be the case as when I set it up 15 years ago, everything was working.

How can I get the strobe test back again?

Thanks