I need to rout beading in an mdf board to replicate existing beading and need a router bit with 1/4 inch shank. I have tried to find suitable bit but unsuccessful. Any ideas on finding attached bit. Cannot work out how to attach image but the bit is sharp point with radius inwards, cutting width is about same as the shank. Anybody adept at adding images??
router beading tool
- Thread starter johnmartin057
- Start date
Sponsored Links
if by bead you mean a raised semicircle then you cant do unless its possible to do it with one off these cutters and 2 passes
http://www.trend-uk.com/en/UK/productlist/3/178/ogee_panel_cutters.html
but that will give the same shape [a mirror image]the other side off the groove
http://www.trend-uk.com/en/UK/productlist/3/178/ogee_panel_cutters.html
but that will give the same shape [a mirror image]the other side off the groove
Sponsored Links
Just guessing , lack of info really. 
sorry for lack of photo but yes, it is on the face and not the edge.
many thanks for all replies
many thanks for all replies
D
Deleted member 174758
Sounds like you might be looking for either a panel beading cutter or a point round cutter
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
