Ryobi ERH-650V any good?

[diy_dude]

Just seen this SDS+ drill in the screwfix sale, its now £40. Have you any experience of this drill? Is it a good buy?

http://www.screwfix.com/prods/23674/Power-Tools/SDS-Drills/SDS-Plus-Hammer-Drill-2kg-240V

I will use it for DIY on a fairly regular basis. I have not wandered into the world of SDS+ before and am not totally sure what to look out for.

 

[neds]

For the DIYer an excellent choice! Big-Al will disagree though

I was thinking about getting one of these or for £15 more there is the bosch one too...

http://www.screwfix.com/prods/99910/Power-Tools/SDS-Drills/Bosch-GBH2-18-SDS-Hammer-Drill-240V

Only thing is that it does not have rotary stop but a great SDS drill nonetheless.

 

[big-all]

For the DIYer an excellent choice! Big-Al will disagree though

I was thinking about getting one of these or for £15 more there is the bosch one too...

http://www.screwfix.com/prods/99910/Power-Tools/SDS-Drills/Bosch-GBH2-18-SDS-Hammer-Drill-240V

Only thing is that it does not have rotary stop but a great SDS drill nonetheless.

l o l yes

i dont have the actual drill but have in excess of 24 ryobi powertools

i do personaly recomend ryobi as diy and light to medium trade
able to do 80 percent of the big boys toys at 40 percent of the cost

 

[neds]

Yeah got a small collection of Ryobi tools too now and I am well impressed with them. Although I did opt for the Makita 2450 SDS drill but i would have gone for that one or the bosch if I hadn't.

 

[diy_dude]

Sounds like it could well be the drill for me then, i'll get my credit card...

 

[-Paul-]

RYOBI ERH-750V 230V 3 MODE SDS Plus Roto Stop

£57.99 delivered, can't be bad for a SDS Roto stop Ryobi just bought one

http://www.toolshopdirect.co.uk/item.php/sn/RYBERH750VTSDPROMO

 

[Stepheninkent]

hi big-all

have you rearly got 24 Ryobi power tools , i thought i was doing well with 7 plus one and a chop saw.
but 24? blimy are they all Ryobi? Can anyone beat 24 power tools?

 

[big-all]

hi big-all

have you rearly got 24 Ryobi power tools , i thought i was doing well with 7 plus one and a chop saw.
but 24? blimy are they all Ryobi? Can anyone beat 24 power tools?

some are doubles and slide on battery from the take 5 set


one+

recip saw
jig saw
circ saw
laminate trimmer/ router
hammer drill
fan
radio
impact driver
dust buster
wet+ dry vac
strimmer
planer
nail gun
fluro lamp

take 5[slide on battery] exactly the same but the old slide on battery

3 hammer drills[dont ask ]
circ saw
jig saw
2 mitre saw
fliro lamp

230v

4" belt sander
erv1150 router


is that 24 or am i exagerating again

 

[RF Lighting]

Can anyone beat 24 power tools?

I'll try

Makita petrol "sthil" saw
Makita 24V SDS drill
Makita 6" belt sander
Makita 1/2" router
Rexon compound mitre saw
Paslode IM250 nail gun
Paslode IM350 nail gun
Dewalt 4" angle grinder
Dewalt 6" circular saw
Dewalt corded SDS drill
Bosch bench grinder
Bosch L-ion screwgun
Bosch electric planer
Bosch Jigsaw
Ferm 1/4" router
Pro Power 9" angle grinder
Pro Power pillar drill
SIP arc welder
Clarke MIG welder
Belle cement mixer
Unknown make table saw
Unknown make 2.2kVA petrol generator

Pah! not quite

 

[xerxes]

I got to 50 without taxing my memory. I don't remotely suppose that's many, compared with some people.

 

[big-all]

Can anyone beat 24 power tools?

I'll try

Makita petrol "sthil" saw
Makita 24V SDS drill
Makita 6" belt sander
Makita 1/2" router
Rexon compound mitre saw
Paslode IM250 nail gun
Paslode IM350 nail gun
Dewalt 4" angle grinder
Dewalt 6" circular saw
Dewalt corded SDS drill
Bosch bench grinder
Bosch L-ion screwgun
Bosch electric planer
Bosch Jigsaw
Ferm 1/4" router
Pro Power 9" angle grinder
Pro Power pillar drill
SIP arc welder
Clarke MIG welder
Belle cement mixer
Unknown make table saw
Unknown make 2.2kVA petrol generator

Pah! not quite

surely you have an angle grinder

 

[gregers]

er lets see now,

at work
dewalt nail gun
dewalt biscuit jointer 110v
makita 18 volt cordless drill with 2 3amp batteries
makita 110 volts screw gun
bosch sds 110v rotary drill
bosch sds jigsaw 110v
bosch planer 110v
elu chop saw 110v
festo 110v 1/4 inch router
hitachi circular saw 110v
draper band saw/sanding disc
bench grinder
plus transformer and leads

at home
elu planer 110v
sip chop saw
hitachi 14v cordless
dewalt 14 volt cordless
freud hinge router
b&q special pro 1/2 inch router
nutool jionter
nutool thicknesser
ferm saw bench(on wheels)
dewalt radial arm saw
nutool pillar drill
nutool bench morticer
perform(axminster)dedicated sanding station
ferm biscuit jionter
ferm bandsaw
ferm 24volt cordless sds
dremel type thing
2x compressors blowers/sprays/nail guns
honda 3kva generator
black and decker drill(yes i own 1)admit it you do too!!
jet wash
bench grinder
tile cutter(electric)
router table
think thatll do for now probably forgotten 1 or 2

 

[ModernMaterials]

Hey gregers

a router table aint a power tool but i guess the vacuum cleaner or dust extractor you use with it could be

surely theres a torch to go with those drill drivers as well?

 

[gregers]

Hey gregers

a router table aint a power tool but i guess the vacuum cleaner or dust extractor you use with it could be

surely theres a torch to go with those drill drivers as well?

it is if theres a another crappy router that goes with it

and funnily enough NO i dont have any torches for any of my c/drills

but i do own a couple of henrys as extractors

 

[Stepheninkent]

Been out to the garage and opened up my tool cupboard and had a good cry, just to check that I had not missed any off and try as I can I still cant get close to these lists. I have the following 15,

Ryobi Plus one
2 x drills, Stapler, Sander, Circular saw, Hedge cutter,

Other brands
B&D Plainer, Bosch corded drill, B&Q Router, B&Q belt sander, B&Q 4” angle grinder, B&Q Jigsaw
Heat gun, Detail sander, & Powercraft Biscuit cutter

Big-All
Do you mind (or am I allowed to ask) if you are a trade person or a DIY’er like myself be it still under training as my good wife can justify.

Perhaps we should have two lists one for trade people and one for Diyers. However I still don’t think that I would be top of the list but perhaps a close runner up!