scanny prox programming

[oasistechnical]

i have been called to a new clients site and she has a scantronic 9853 system,
all round a really good install,

but the prox tags are not programmed in to the system

and i am sorry i cant remember for the life of me how to do it!!

programming general use codes no problem, code then 4 but prox programming, cant remember!!

Now if this was a Galaxy, that would be different!!


any one know how to??
John

 

[caretech]

Proximity Tags
Each normal user (Users 2 to 50) can have a tag, an access code or both.
You cannot assign a tag to the master user (U01), the installer (U00), the
guard (U50) or the duress code (U51).
You set up a tag in a similar way to an access code. Instead of entering a new access code for the user, present the tag. The system learns
the identity of the tag and links it to the user number. The keypad confirms
that the tag has been learned with a double bleep

 

[caretech]

Sent you email

 

[oasistechnical]

thanks mate !
its quite a while since i have done one
now it seams so easy

John