Shower pump

Joined
26 Nov 2007
Messages
177
Reaction score
0
Country
United Kingdom
People,

Can anyone suggest a Company that can supply a 3 bar pump that can be fitted at the same height (or slightly higher) as the cold water tank.

I am unable to fit a pump under the bath or in the airing cupboard so the loft seems to be the next best place.

Stuart Turner are unable to supply a pump that can do this. They have advised I would have to raise the cold water tank.

The pump needs to be hot and cold input and hot and cold output to feed a shower only.

Cheers




Need Help21
 
Sponsored Links
your not going to get a shower pump that sits higher than its supply.

the pump needs to be lower than the supply tank
 
You need to be asking them for a Negative Head pump.

As far as I can see they do them.

Failing that look at Salamander or Watermill.

But speak to Turners first asking to Neg Head pumps.

Rico
 
Sponsored Links
Thanks Seco, That is probably what I am going to have to do.

Stuart Turner have advised that the top of the pump can be no less than 500mm from the water line in the cold water tank so I am hoping it won't be a major job to raise the tank
 
Moving the water tank in the loft will not be an easy job. Its present position, with regard to its capacity, is probably as high as the plumber could fit it when it was first installed. Bearing in mind that you are fitting a pump, you need a big tank. If its laid on the joists, its because the weight has to be spread. If you put it on a 4 legged table secured directly to the joists, the 4 legs will stress the joists. So, I would advise a solid platform (25mm ply) to spread the load and build the table on that, with the legs located on the spans between the joists.

If it is at all possible, could you fit the pump below the floorboards in your bathroom? It should be adequately cooled by inter-floor ventilation and also prevented from freezing, which is another issue with pumps in lofts: keeping them cool (ie no insulation should be wrapped around them), but also preventing them from freezing in winter.

Either way, you have some hard work ahead. Good luck.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top