Shower tests before i seal it up!

[D1nhs]

Okay guys, ive fitted the thermostatic shower into a stud wall.

Water is on, no leaks at all.

Is there anything else i should do before i seal up the other side of the wall and have it plastered?

Any standard tests i should run?

Not sure if you can tell but im very nervous about sealing it all up :s

 

[Gasguru]

Have you flushed out the pipework and commisioned the valve as per the manual?

If you can I would leave it for a day or so just to make sure its OK.

 

[D1nhs]

Yes i flushed out the pipes before connecting the shower valve, and its been connected for a few days now.

I ran the water last night for about 5 mins and checked for leaks so i guess im good

Thanks for the reply