SMEG Dishwasher DWF409SS-changing the main filter supprossor

[ukspacecadet]

Hi the main filter suppressor on my smeg dishwasher, DWF 409 SS, has burnt out. I have a new suppressor but stupidly didnt make note of the position of the 4 colours of wires that need to be re-connected. Please advise. Thanks

 

[zipper]

Normally there is an easy to follow schematic printed on the suppressor body (should be on both the old & new one).

 

[ukspacecadet]

Hi

there is a schematic but no colour guide.

When looking at the cables, it looks like the brown cable and blue cable reach the live side and the red cable and white cable reach the neutral side. I thought that blue was neutral though.

If the above combination is correct, does it matter which spade connetor they go in to as long as its the correct side

thanks

 

[zipper]

A suppressor is just a filter, it is only there to prevent radio interference. It has a live in & a live out...neutral in & neutral out.
Follow the mains cable. Brown is L...Blue is N. These two go to the L & N terminals on the suppressor. The 2 leftover leads go to the remaining terminals.