Our DI162 dishwasher has developed a problem, the machine attempts to do something beeps twice then immediately beeps again and stops. There is water in the bottom of the machine and the program lights flash indicating an E8 error. Buying a new PCB board is not cost effective, is there some kind of soft re-set I can do.
SMEG Dishwasher Problem
- Thread starter smeg
- Start date
Sponsored Links
- Joined
- 2 Apr 2006
- Messages
- 1,896
- Reaction score
- 29
- Country
Does your machine have a half load button?
I've got 2 E8 error codes for smeg. One is for the older appliances and is a "read error". The 2nd is for newer appliances and it's a failure of the alternating valve.
I've got 2 E8 error codes for smeg. One is for the older appliances and is a "read error". The 2nd is for newer appliances and it's a failure of the alternating valve.
Hi Sleepyhead, many thanks for your help. No, the machine does not have a half load button and we have had it for about 3 years. The machine only has 5 programmes (soak,light,eco,normal and intensive). When the cycle stops I can push and hold the program but and it advances to the end of the program, I then put it on soak which rinses the dishes. Therefore, I know that it can empty and I believe that it must be a software problem.
tks
tks
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
