soffit/box end with no barge board

[23vc]

Ta. So, my order is:

1 fit fascia and soffit
2 finish cut gable bricks to the correct line level With top of rafter
3 fit undercloak, with a kick horizontal where it hits the fascia and soffit so it ends up on top of the fascia

Make sense or still wrong?

 

[^woody^]

2
1
3

 

[Mike10]

I don't like that closer there.

Which bit exactly is it that you don't like? I would be interested to know as this is a photo of my house.

 

[23vc]

As usual, thanks for your patience

 

[noseall]

I don't like that closer there.

Not one of my jobs Woods. That image was gleaned from a Google search.

 

[^woody^]

Which bit exactly is it that you don't like? I would be interested to know as this is a photo of my house.

Lol. That could have been awkward.

There is a rule with brickwork that there should be no cuts of less that half a brick within a wall, and any closure (1/4 brick) should only be placed towards the ends of a wall with a header on the end. So that should be a 3/4 cut and the bond reversed on the corbel.

It's not a structural issue just a visual one. It's not too bad otherwise.

 

[23vc]

Which bit exactly is it that you don't like? I would be interested to know as this is a photo of my house.

What are the chances lol

 

[Mike10]

Thanks, was just curious. I didn't do the brickwork myself but got some brickies in to do that as it would have taken me months I expect.
Having checked, they've done all the corbels the same way. So at least it is symmetrical