- Joined
- 12 Apr 2008
- Messages
- 49
- Reaction score
- 0
- Country
Hi all, i am getting ready to install a new soil stack and vent which will connect to an already installed ridge vent. My question is on the installation of the ventilation part and the use of flexible hose /pipe.
Are ther any regs on the type/quality/ distances of flexible pipe i have to use? Can i use simple pvc flexihose as used in the bathroom fan?
Many Thanks
Edit i have added this rather crude representation of where my pipe is going. The problem with th supplied ridge vent connector is that the connector is only bout 1mtr long. So i would need to insert solid pipe up the angled part of the roof, then fit another small length before i even meet the flexipipe.
My plan was to have approx 3m of flexi pipi (black stripes on mydrawing)
Are ther any regs on the type/quality/ distances of flexible pipe i have to use? Can i use simple pvc flexihose as used in the bathroom fan?
Many Thanks
Edit i have added this rather crude representation of where my pipe is going. The problem with th supplied ridge vent connector is that the connector is only bout 1mtr long. So i would need to insert solid pipe up the angled part of the roof, then fit another small length before i even meet the flexipipe.
My plan was to have approx 3m of flexi pipi (black stripes on mydrawing)