Squaring interior arch

Joined
10 Nov 2023
Messages
5
Reaction score
0
Country
United Kingdom
Hopefully, this is simple. I want to square off the arch that separates my living and dining rooms. I have highlighted the area below that I want to remove. Being very new to DIY I planned to just chip away at the brick/concrete (which I'm assuming it's constructed of) and then put plasterboard over it. My concern is that it will cause structural damage. I am being overly cautious?
Home.jpg
 
Sponsored Links
the brick/concrete (which I'm assuming it's constructed of)
unlikely

it may just be a plaster arch former -in which case it will be hollow

try drilling into the deepest part of the arch with a smallish drill -say 6mm and see how easily it goes in

its almost certainly not structural


your biggest problem is plasterboard as you really need to put in some thin coat edge beads and skim -possible but tricky if youve never attempted plastering before
 
Because you need the height or because you don't like the look?
 
Sponsored Links
unlikely

it may just be a plaster arch former -in which case it will be hollow

try drilling into the deepest part of the arch with a smallish drill -say 6mm and see how easily it goes in

its almost certainly not structural


your biggest problem is plasterboard as you really need to put in some thin coat edge beads and skim -possible but tricky if youve never attempted plastering before
Thanks, I’ll try drilling it today. The plastering aspect I’m happy to pay someone to do well. Also we need the fireplace and area around the new windows plastered so we’ll do it all at once.
 
Would squaring it off at the lower level also work for you or does the height at centre form part of the required aesthetic?
 
Tap it. If it's hollow above, it's a mesh or plaster arch with a lintel higher up, so can be easily squared.

If solid, it will likely need support and new lintel.
 
There is a wooden support going across the room and adjacent hallway.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top