Preparing the wall for dashing, do all fixing[screws, washers] for mesh, bead etc need to be stainless steel, or is zinc coated enough?
Stainles steel fixings
- Thread starter foxhole
- Start date
Sponsored Links
- Joined
- 19 Jan 2008
- Messages
- 2,373
- Reaction score
- 431
- Country
We always put our mesh on with galvanised nails, sometimes using 3" and 4" ones if the surface was uneven stone work. Have also meshed a building with s/steel mesh and s/steel screws and s/steel washers. and we had to drill and plug the holes with rawl plugs !!!
We used these on the rough brickwork, expensive , but it's just a small area. They hold the mesh 5mm off the wall.[Fix them first then they have an ali nail thru a large plastic washer that hammers in.]
http://www.sovchem.co.uk/eml-fixings-pack-of-200.html
http://www.sovchem.co.uk/eml-fixings-pack-of-200.html
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
