- Joined
- 25 Nov 2014
- Messages
- 4
- Reaction score
- 0
- Country
Here's another DIY plumber question. I live in rural France and have installed an oil fired heating only, pumped, pressurised system.
The boiler is a Deville Carola 3 and has integral electrical thermostat connections linked. Most rads have thermostatic valves.
I bought in UK a Sunvic Supro 1000 single channel programmer on advice of plumbers merchant, ease of installation, wiring etc.
Temporary set up is that simple timed electrical connection turns heating on and off. I would like to use the Sunpro 1000 as simple time switch but can't understand wiring connections. Is it essential to fit thermostat since programmer has built in max thermostat.
Asked Sunvic but all tech service systems down due to redundancies.
The boiler is a Deville Carola 3 and has integral electrical thermostat connections linked. Most rads have thermostatic valves.
I bought in UK a Sunvic Supro 1000 single channel programmer on advice of plumbers merchant, ease of installation, wiring etc.
Temporary set up is that simple timed electrical connection turns heating on and off. I would like to use the Sunpro 1000 as simple time switch but can't understand wiring connections. Is it essential to fit thermostat since programmer has built in max thermostat.
Asked Sunvic but all tech service systems down due to redundancies.