Table lamp holder - source of the base mounting screw?

[stuckinthemud]

I have a broken table lamp, where the lamp holder has been snapped off the base.

Looking for a replacement lamp holder with the screw attachment at the bottom, so I can re-mount it on top of the base.

Can find hundreds of lamp-holders with varying sizes of thread in the base (1/2 inch is ideal for this application), but have failed to any sources of the actual hollow screw that attaches the holder to the lamp base.

Can anyone suggest where I can get the mounting screw?


Random photo of the type of lamp fitting I'm trying to mount, clearly showing the threaded bottom that I can't find the screw for!

http://www.angliatoolcentre.co.uk/uploads/images/products/product_32005.JPG



Jim

 

[ricicle]

Your local electrical wholesalers should be able to help you out. There are small threaded bushes to reduce the size of the opening available.

 

[stuckinthemud]

It's not reducers I need (have found them), simply the actual hollow screw to bolt the thing to the base - i.e. something with a flange on one end so it can be clamped up inside the base.

Hole is about 1/2 inch, so no adjustment of size needed.



Jim

 

[tonyelectric]

Try this firm

http://www.s-lilley.co.uk/

or

http://www.lampsandlights.co.uk/lampholders.htm

 

[tonyelectric]

what you need is part 9092 in the Lilley catalogue, this shop does mail order and is a Lilley agent

http://www.lightingworkshop.co.uk/

 

[flameport]

This: http://www.ryness.co.uk/products/3334-12-inch-brass-nipple-3043.aspx
and this: http://www.ryness.co.uk/products/3857-12-inch-brass-lock-nut-3050.aspx

Both also available in 10mm thread.

 

[RF Lighting]

http://www.tlc-direct.co.uk/Products/LY1115.html

 

[stuckinthemud]

This: http://www.ryness.co.uk/products/3334-12-inch-brass-nipple-3043.aspx
and this: http://www.ryness.co.uk/products/3857-12-inch-brass-lock-nut-3050.aspx[/QUOTE]

Thanks, just the pointer I needed