tap washers

[teddyb]

Hiya

Trying to replace tap washers .....
I bought 1/2" tap washers, but these seem too big. So I bought some 3/8", but these seem/are too small.

Does anyone know if I can get some that would be 'just right'. I wasn't aware that tap washers could be so tricky! It's a kitchen tap mixer.

I'd be really grateful for any advice, thanks.

 

[spraggo]

Try using 1/2" "Delta" tap washers

 

[Charnwood]

Delta (sometimes called semi-domed) tap washers tend to have quite a large centre hole.
The 1/2" Delta is probably the same size as the 3/8" the OP already has.