can anybody tell me where I can get adaptors for a multi function tester for testing light circuits through the fitting without having to remove the fitting for doing earth loop tests etc
testing lighting circuits
- Thread starter wayneward25
- Start date
Sponsored Links
You're still going to have to undo the light fitting to access the CPC - so not going to help you, really. (unless it's a class 1 light fitting, of course)>
As above, you are not going to get r2 readings or Zs, so unless you are testing for r1 and rn don't see the value of having them in your tool bag|
Sponsored Links
It's much easier to have L and N leads plugged in and held, with probe to E terminal than have croc on E and poke two probes into two holes with one hand.
As has been said, even easier with a metal fitting.
I don't understand the opposition.
As has been said, even easier with a metal fitting.
I don't understand the opposition.
No, me neither.
So on a class 2 fitting you still have to dismantle to get a Zs but those light mates are a god send on fancy class 1 fittings.
Got some for about 30 quid, from an ebay seller called Janico of York. Were the cheapest at the time
It's one of those things I have no idea how I ever managed without them. 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
