Texecom Premier Elite Part Set

[Delboy61]

So with good advice thanks SecureIAm and SparkyMarka the system is installed and have tested at the weekend with the Wife in the Garden. Works ok.
But, struggling with night time part set.

Night time I want to have the Garage (Texecom DT) and patio doors - (normally closed CQR sensors)set . So have been setting them to on and other 6 Zones Off.

My Zone 1 is a PIR in the Hall and is Entry Exit. As I set the keypad (in the hall) and set on the night setting the alarm goes off . Obviously I am standing there and the PIR would pick me up but that is "OFF". I am obviously doing something silly wrong

Watched a few Texecom Vids and followed the Setting Up Part Set one it still goes off.....

Thoughts welcome

Derek

 

[sparkymarka]

part 1 omit for all the zones you want off at night in zone attributes …what are you doing to set it at night ? Code ———— part ( do you want night set ) press yes ?

 

[Delboy61]

So with good advice thanks SecureIAm and SparkyMarka the system is installed and have tested at the weekend with the Wife in the Garden. Works ok.
But, struggling with night time part set.

Night time I want to have the Garage (Texecom DT) and patio doors - (normally closed CQR sensors)set . So have been setting them to on and other 6 Zones Off.

My Zone 1 is a PIR in the Hall and is Entry Exit. As I set the keypad (in the hall) and set on the night setting the alarm goes off . Obviously I am standing there and the PIR would pick me up but that is "OFF". I am obviously doing something silly wrong

Watched a few Texecom Vids and followed the Setting Up Part Set one it still goes off.....

Thoughts welcome

Derek

Perfect Sparkymarka-sorted Thank you very much for taking the trouble to respond.

 

[sparkymarka]

No problem