Thermostat help

[brianmini]

Hello peeps.

I have a Saunier Duval themaclassic F30e combi boiler fitted in my garage, this has a electronic timer control panel fitted to it but I have no control panel or thermostat in my house, so if its a cold day I have to go out the front door, and into the garage to switch the boiler on.

My question is would a Honeywell DT92e do the trick for me allowing me to monitor the house temp and boost the system when i'm at home (outwith normal expected hours)?

 

[glasgowgas]

without digging through honeywells site to find out what a DT92e is

any single channel programer with t/stat inside your house will do the job

i would put in a programmable room stat, salus rt500rf or honeywell cm927, will do exactly what you are looking for

 

[brianmini]

How much are those other units? Kinda want to keep the cost down..... every penny counts.

 

[glasgowgas]

have a look at screwfix,toolstation

salus about £60 inc vat

cmt 927 about £85 plus vat

piece of peepee to wire in

a pro about 1 hr start to finish

diyer 3hrs tops

post back for anymore infp

 

[doitall]

Get a Drayton Digi-stat 3 programmable room stat.

You can pick them up on ebay for £30.00.

 

[brianmini]

Are any of those devices available in wireless? Much prefer that option to drilling holes in walls.... its thick wall to get through.

 

[glasgowgas]

rhe two i told you are wireless

the rf is a giveaway (radio frquency!!!)

 

[brianmini]

oops... never scrolled up to your previous post there.

Good news that... cheers chaps for your help. Off shopping I go!

 

[brianmini]

Just ordered a salus rt500rf online, £35... bit of a bargain that... cheers people!

 

[glasgowgas]

View media item 13840

 

[glasgowgas]

View media item 13840

FFS brian post that link son!!!!!!!!!!!!!!

 

[brianmini]

It was an ebay shop to be honest, just did a google search and followed the cheapest retailer.

Now what I need is for someone to tell me which connections I wire up for volt free wiring on the Salus to a Saunier Duval Thermaclassic F30e. I've no idea which wires and how many I use. The little instruction book with the Salus is little help and the Saunier Duval instructions don't make any sense either.

Help?

 

[brianmini]

Ignore my last post, bit of a "special" moment going on.... All sorted now wired up and working away.... not I just have to work out the program guide. Spotted a post on here about that so off I go reading.