We are tiling our bathroom and have an area that is a little tricky. Around an old boarded up fireplace there is a remaining stone hearth that is raised 4mm above the floor boards. We want to tile over this making it indistinguishable from the surrounding tile.
We have layed 6mm overboard (substitute plywood) board around - but not on - this area so now it is a few millimetres lower than the surrounding ply board. Can we simply use extra tile adhesive to 'build up' the tiles in this area making them level with the surrounding tiles?
Any advice appreciated.
We have layed 6mm overboard (substitute plywood) board around - but not on - this area so now it is a few millimetres lower than the surrounding ply board. Can we simply use extra tile adhesive to 'build up' the tiles in this area making them level with the surrounding tiles?
Any advice appreciated.
