Two RCD's or only one??

Joined
18 Nov 2007
Messages
21
Reaction score
0
Location
Northamptonshire
Country
United Kingdom
Hi,

Got an aroured power cable running out of the house, under some paving then under a deck and into a socket.

The socket feeds two 'outdoor' switches, one of which powers a pond pump ...

question is, I thik - should I put an RCD on the power cable coming out of the house?

And
]should I put an RCD on the cable that runs from theoutdoor switch that powers the pump?

TIA
 
Sponsored Links
Armoured cable itself does not have to have RCD protection, the socket does need RCD protection. This can be achieved by using an RCD "Powerbreaker" type socket or by having an RCD protecting the armoured cable and the socket.
Are these switches plugged in?
Also, you should note that this work is notifiable to your LABC under part p of the building regs.
 
Yeah upstream RCD protection for me,then anything you add in the future will also be automatically protected.

ooops by upstream i mean using an RCD in the C/UNIT in the form of either group protection or singular RCBO.
Just bare in mind pond pumps can offer leaky earth current`s and on some occasions sheath currents* can found to run in the armour of SWA and trip the C/UNIT RCD taking out all other circuits protected by the same RCD.

*Ive never come accross armour sheath current`s but ive heard about them from other installers.
 
Cheers for the advice guys,

so where exactly should I have the RCD?

In case you haven't guessed, I have no electrical experience/knowledge at all :D
 
Sponsored Links
Spark123 - You need to edit your post. I'm know it's just a typeo but you have written that armored cables need RCD protection.

Gypmaster. Best option would be RCBO as per Festas suggestion (if your consumer unit will support one) It would go in place of the MCB.
 
Cheers,

given what I've said about the set-up i.e. no RCD anywhere, is it safe?

I reckon I'll need to get a qualified leccy in then, eh?
 
An outside socket without RCD protection is not considered safe.

It may be better to consult a qualified pro, yeah.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top