- Joined
- 15 Apr 2018
- Messages
- 268
- Reaction score
- 1
- Country
Hi All
I am build a shed and a summer house that will be built seperately but joined together.
Due to work stuff I thought it would be easier to build my little shed ( 1.5m wide 2.4m depth) 1st as one structure ( I am talking walls osb sheathing, tyvek and battens)
Then when I have more time ( and the required windows doors etc) i will build the summerhouse part (3.1 x 2.4)
Looking at the front the shed will be on the left.
Once I have built and sheathed the shed I want to protect it with Tyvek so was going to wrap the whole lot with tyvek.
But once I have built and installed the summer house ( this will have a separate end wall as well) the tyvek will techniacally be in the inside of the tructure.
Does this matter or should i cut it off before joining the 2?
Finally I was going to staple the Tyvek on and realise I should tape the seams.
Is their an alternative to tyvek tape.
Advice much appreciated
I am build a shed and a summer house that will be built seperately but joined together.
Due to work stuff I thought it would be easier to build my little shed ( 1.5m wide 2.4m depth) 1st as one structure ( I am talking walls osb sheathing, tyvek and battens)
Then when I have more time ( and the required windows doors etc) i will build the summerhouse part (3.1 x 2.4)
Looking at the front the shed will be on the left.
Once I have built and sheathed the shed I want to protect it with Tyvek so was going to wrap the whole lot with tyvek.
But once I have built and installed the summer house ( this will have a separate end wall as well) the tyvek will techniacally be in the inside of the tructure.
Does this matter or should i cut it off before joining the 2?
Finally I was going to staple the Tyvek on and realise I should tape the seams.
Is their an alternative to tyvek tape.
Advice much appreciated
