Under cabinet lights

Joined
20 Oct 2021
Messages
46
Reaction score
2
Country
United Kingdom
Could anyone advise if I can buy just the housing and bulb for this light as it's broken. Thanks
 

Attachments

  • PXL_20250323_100208795.jpg
    PXL_20250323_100208795.jpg
    98.8 KB · Views: 26
  • PXL_20250323_095809133.jpg
    PXL_20250323_095809133.jpg
    153 KB · Views: 26
You haven’t shown us the important bit- the actual bulb holder. !
Note that the one you have, and the one suggested by @Murdochcat are 12v halogen lights. Halogen lamps have been discontinued so it would be better to find a way to fit an LED equivalent light fitting. Something like this
You may find that you need to replace the power supply too.
 
Last edited:
Thanks to you both. Attaching holder picture. I want to try to swap out the bulb and holder bracket ideally. The wire has two small pins that the halogen inserts into. I can get the bulbs but not sure if i can find the right holder/bracket.
 

Attachments

  • PXL_20250323_095809133.jpg
    PXL_20250323_095809133.jpg
    153 KB · Views: 8
  • PXL_20250323_095834873.jpg
    PXL_20250323_095834873.jpg
    217.6 KB · Views: 9
  • PXL_20250323_100204103.jpg
    PXL_20250323_100204103.jpg
    461.8 KB · Views: 9
  • PXL_20250323_095942512.MP.jpg
    PXL_20250323_095942512.MP.jpg
    434.3 KB · Views: 9
The holder and reflector will be specific for that particular fitting. You might be lucky on eBay, but the Knightsbridge one is only £6 for the WHOLE FITTING so why bother?
They probably even cheaper elsewhere because nobody wants them because the lamps have been discontinued. So you’ll need to replace for an LED fitting soon anyways.
 
They probably even cheaper elsewhere because nobody wants them because the lamps have been discontinued.
We used to have them. I used to buy the bulbs in boxes of 20 at a time - they would blow with frightening regularity. LED's all the way now for me.
 
Thanks. Those Knightsbridge ones are sold out. I could get these https://www.tlc-direct.co.uk/Products/KLTWW.html

Is it easy to swap the whole unit? I am comfortable working with electrics.
Those ones are 230v mains LED units. They would be ok, but you would have to remove the transformer and use the existing wiring -if that is suitable for mains voltages.
Is that the only under cupboard light, or are there more on the same transformer?
 
Thanks, the existing transformer is not for LEDs i dont think as these are regular 20w halogen bulbs. Any suggestions what I could swap with? Sorry @Taylortwocities recommended the same one I posted but I am guessing this wont work.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top