Unidentifed electrics behind plasterboard

Joined
19 Dec 2016
Messages
18
Reaction score
0
Country
United Kingdom
Just a quick one guys,

I've recently removed plasterboard from around where my shower was in the en suite. I've discovered a lot of damp so there is going to be a lot of renovation going on. One thing I am not sure on at the moment is this electrical component and wires.

Can anyone tell me exactly what it is and what it will be serving?

5t8N64n.jpg


It comes down from the ceiling and disappears behind the walls again in the corner just out of site in the above picture.
 
Sponsored Links
Sponsored Links
The cable that is nearly hidden by the pipe will go to the next socket on the ring. You can just see the cable above the pipe on the right side of the picture
 
Thanks for the replies.

The pipes were about to be fitted to a new shower when all the damp was discovered so are not positioned and have just been left where is.

The cutting of the back box seems completely unneccessary and unsafe then? I'll get it replaced out.
 
You've got to take it off anyway, to replace the plasterboard. And possibly the whole section of wall, depending on the state of the timber, which doesn't look good, particularly the sole plate. Given the work done so far, and what's left, it doesn't make sense to cut corners for the sake of another day's work and a few £10's of materials.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top