I have a Vent Axia Luminair Fan Light in a shower-room, and the bulb went out, so I replaced the bulb. It worked for about 10 minutes then the new bulb went out. Now no new bulbs work. The fan still operates as usual. Any ideas?
Vent Axia Luminair Fan Light
- Thread starter itsfatboyjim
- Start date
Sponsored Links
Do the lamp connectors look in good condition? (not bent or broke)
the lamp connectors look fine - though the unit is approx 5 years old - do they need replacing after time or is it best to get a new unit?
Check your new lamp is the same wattage as the old one.
Many of those shower lights are limited to 35watts. I'll bet you've put in a 50W and the transformer might not like that....
Alternatively it might be the transformer that's cream crackered, and not the lamp.
Many of those shower lights are limited to 35watts. I'll bet you've put in a 50W and the transformer might not like that....
Alternatively it might be the transformer that's cream crackered, and not the lamp.
Sponsored Links
IIRC, they might even be limited to a 20W lamp...
It has two pins, doesn't twist or anything. Just pull it and it should come out.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
