Hotpoint (RD1076JDUKN)
Runs fine on all wash settings and spin / drain.
When I run a dry cycle on its own, or immediately following a wash, the clothes come out still wet (well more wet than after end of a wash cycle) and hot due to water being dumped in part way through wash.
The appliance has failed to dry effectively for some time but has now become much worse ie every dry cycle. The machine has been moved fairly recently but performed a drying cycle successfully on one occasion.
I've attempted resetting the machine by leaving without power for a while, ran a maintenance wash cycle (ie 90 c) and I totally removed drain pump for thorough cleaning but this has made no difference.
I've seen suggestions that replacing the water inlet may solve this but I don't fancy a game of parts bingo. I also saw a post with a similar issue which was relating to a gauze looking piece missing, I definitely do not have this part and it may have been lost during recent move.
Also considering clearing out condenser tank but this has recently been done (ie within the last 12 months).
Any assistance / suggestions much appreciated.
Runs fine on all wash settings and spin / drain.
When I run a dry cycle on its own, or immediately following a wash, the clothes come out still wet (well more wet than after end of a wash cycle) and hot due to water being dumped in part way through wash.
The appliance has failed to dry effectively for some time but has now become much worse ie every dry cycle. The machine has been moved fairly recently but performed a drying cycle successfully on one occasion.
I've attempted resetting the machine by leaving without power for a while, ran a maintenance wash cycle (ie 90 c) and I totally removed drain pump for thorough cleaning but this has made no difference.
I've seen suggestions that replacing the water inlet may solve this but I don't fancy a game of parts bingo. I also saw a post with a similar issue which was relating to a gauze looking piece missing, I definitely do not have this part and it may have been lost during recent move.
Also considering clearing out condenser tank but this has recently been done (ie within the last 12 months).
Any assistance / suggestions much appreciated.
