- Joined
- 28 Jul 2006
- Messages
- 1
- Reaction score
- 0
- Country
When my washer fills with cold water the flow is weak and the pipe rattles or vibrates. I opened it all the way but it didn't help. What is wrong with it?
Water pipe rattles in washer
- Thread starter Planewatchers
- Start date
Sponsored Links
- Joined
- 25 Feb 2006
- Messages
- 125
- Reaction score
- 0
- Country
Try shutting the cold water off on the washer and then unscrewing the hose from the water valve. Once this is removed check the filter screen attached to either the hose or the valve. Chances are your screen is clogged with sediment. Either clean them or replace if they are clogged and your should be all set. If the screen is not clogged you may have a bad water valve. If you have voltage to the valve and no water, you'll have to change the whole valve.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
