water tank insulation jackets: recommended products?

[shagty]

hi everyone

i'm searching for a quality insulation jacket suitable for retrofitting to domestic/light commercial water storage cisterns (internal) such as cold water, F&E..

the most common product available appears to be the standard black polythene lining with mineral fibre infill.

i know of better quality insulation jackets that comprise more durable lining such as nylon or similar (sometimes blue in colour) and are fitted with straps for tieing into place, but I cant find any details.

would anyone have some information on these products such as specification, suppliers to share?

any help/advice would be greatly appreciated.

thanks for reading

regards s

 

[bryanpar]

http://www.onlineplumbingsupplies.com/mangersTankJackets80.asp
try this site this is an 80mm jacket which is thick enough to keep out any cold

 

[shagty]

http://www.onlineplumbingsupplies.com/mangersTankJackets80.asp
try this site this is an 80mm jacket which is thick enough to keep out any cold

thanks for the link bryan
but the lining on those jackets are very light imo.
I'm think of something with a durable lining, and similar in appearance to the product in the following link but obviously much more affordable.
http://www.combinedharvesters.co.uk/productcart/pc/viewPrd.asp?idproduct=1055&idcategory=202

[/url]

 

[bryanpar]

http://www.onlineplumbingsupplies.com/mangersTankJackets80.asp
try this site this is an 80mm jacket which is thick enough to keep out any cold

thanks for the link bryan
but the lining on those jackets are very light imo.
I'm think of something with a durable lining, and similar in appearance to the product in the following link but obviously much more affordable.
http://www.combinedharvesters.co.uk/productcart/pc/viewPrd.asp?idproduct=1055&idcategory=202

[/url]

where do you live in the antartic !!!
most jackets you can buy now are to bs standards mate dont forget its just to stop it freezing which them jackets will do

 

[shagty]

http://www.onlineplumbingsupplies.com/mangersTankJackets80.asp
try this site this is an 80mm jacket which is thick enough to keep out any cold

thanks for the link bryan
but the lining on those jackets are very light imo.
I'm think of something with a durable lining, and similar in appearance to the product in the following link but obviously much more affordable.
http://www.combinedharvesters.co.uk/productcart/pc/viewPrd.asp?idproduct=1055&idcategory=202

[/url]

where do you live in the antartic !!!
most jackets you can buy now are to bs standards mate dont forget its just to stop it freezing which them jackets will do

i'm very happy with the u-value but the polythene lining is very light i think.
the jacket is pretty flemsy and collapses at the sides an corners unless it is taped up. there are similar products with nylon linings and straps for esay removal.. designed to stand up to routine removal for maintenance etc. but I can find any leads.