What compression fitting for 15mm copper pipe to 3/8 microbore ?

[ollysfollys]

Ok this has my head banging, although tired so hard to think straight at the minute.

I have 15mm copper pipe it need to connect to 3/8 copper pipe.

Can anyone link me to a compression fitting for a female end for 15mm pipe to male end for 3/8 pipe.

This BSP and metric with imp has got me head banging.

Thanks

Wayne

 

[ollysfollys]

Am i correct in thinking i need a female 1/2 bsp to 1/8 bsp male ????

 

[kidgreen61]

Methinks you need a 15x 10mm reducing coupler?
Never seen 3/8 copper

 

[ollysfollys]

#\\\\\####

Methinks you need a 15x 10mm reducing coupler?
Never seen 3/8 copper

I measured the pipe and its 9.53mm so 3/8. near .5mm small than the 10mm i have.

Measured up th original pipe OD 9.52mm and new ( 10mm ) 9.99mm. 3/8 is 9.53mm. so the original must be imperial size.

 

[polesapart]

10mm compression : replace olive with 3/8" imperial olive

 

[ollysfollys]

10mm compression : replace olive with 3/8" imperial olive

Is that a done thing though as in safe, Hamiltons do all the bits here

https://www.gasproducts.co.uk/10mm-compression-x-1-2-148-bsp-female.html for the fitting and

the olive

https://www.gasproducts.co.uk/3-8-inch-imperial-copper-olive.html

 

[muggles]

https://www.jtmplumbing.co.uk/john-...fit-unequal-straight-connector-15-x-3-8-p4298

 

[fixitflav]

https://www.jtmplumbing.co.uk/john-...fit-unequal-straight-connector-15-x-3-8-p4298

Is that OK for gas? Going by the links I think OP has gas in mind.

 

[muggles]

Is that OK for gas? Going by the links I think OP has gas in mind.

I chose to assume they weren't talking about gas, because messing around with gas as a DIYer would be monumentally stupid

 

[fixitflav]

I chose to assume they weren't talking about gas, because messing around with gas as a DIYer would be monumentally stupid

Maybe the OP will come back and tell us, but what's the answer?

 

[BoilerBob]

I had an inkling he was working on gas. Bob

 

[ollysfollys]

What i am after is a fitting for this shut of valve here in this link.

https://www.caravanparts.express/co...R61VEMtPOb7pL9n5oXLdooDRuW3EcYxRoC3XoQAvD_BwE

 

[Emit]

That shut off valve is for gas.

 

[muggles]

What i am after is a fitting for this shut of valve here in this link.

https://www.caravanparts.express/co...R61VEMtPOb7pL9n5oXLdooDRuW3EcYxRoC3XoQAvD_BwE

It's against forum rules to advise on DIY gas work, so you're unlikely to get much more help I'm afraid

 

[fixitflav]

What i am after is a fitting for this shut of valve here in this link.

https://www.caravanparts.express/co...R61VEMtPOb7pL9n5oXLdooDRuW3EcYxRoC3XoQAvD_BwE

I can't see how that relates to
"I have 15mm copper pipe it need to connect to 3/8 copper pipe."