What thread is this.........

[Redhotferrari]

Need to fit a Monobloc Mixer tap for a hairdresser (the type with a hose from under the sink)

Its a REM Monobloc Mixer as this link http://www.jshairsupplies.co.uk/product.php?id=183

Any idea what the thread is on the flexi? Its not 1/2" but quite a bit smaller, hoping someone might know what it is and if you get a 15mm - whatever it is size, or a 1/2" to the size adapter.

Hoping someone might be able to put me in the right direction.......

 

[gasandoilman]

3/8th bsp

 

[Redhotferrari]

Thanks for the help.

I can only find a 3/8th x 10mm compression MI, so am I right in thinking from the isolation valve already on pipework I will need to reduce down from 15mm to a short piece of 10mm and connect to this?

What a pain in the A***........

 

[Agile]

Has the Screwfix crashed tonight then?

Tony

 

[Redhotferrari]

Thats where I was looking, in the book though not online, can only see a 10mm x 3/8 MI, not a 15mm x 3/8 MI.

Do you have a link for one then?

 

[Redhotferrari]

Thanks for all the advice guys have found what is required at the merchants