Hi there,
This is my first post, I'm updating the house with a new underfloor heating to go with existing radiator system running off Ferroli Maxima 35C Combi. I've plumbed in the CH output to a 3-port Valve to supply Radiators and UFH seperately. The plan is to control each by its own Programmer/Roomstat, for the radiators I have the existing Honeywell Wireless CM67/R6660D Relay supplying voltage free switching to the Ferroli, But I'm unsure how to integrate the 3port Valve, Reliance UFH pump/mixer, and Roomstat with the Ferroli.
I was planning to use a Y-plan and substitute the normal Cylinder Pump/stat with the UFH/stat, but how to supply 240v & link to the Honeywell voltage free output?
Any advice would be welcome.
This is my first post, I'm updating the house with a new underfloor heating to go with existing radiator system running off Ferroli Maxima 35C Combi. I've plumbed in the CH output to a 3-port Valve to supply Radiators and UFH seperately. The plan is to control each by its own Programmer/Roomstat, for the radiators I have the existing Honeywell Wireless CM67/R6660D Relay supplying voltage free switching to the Ferroli, But I'm unsure how to integrate the 3port Valve, Reliance UFH pump/mixer, and Roomstat with the Ferroli.
I was planning to use a Y-plan and substitute the normal Cylinder Pump/stat with the UFH/stat, but how to supply 240v & link to the Honeywell voltage free output?
Any advice would be welcome.
