Wiring new bell box?

[darren6645]

Hi I have a Paragon plus control panel and 6 core cable to feed bell box is as follows:-
-stb blue
+stb white
BA yellow
B+ red
B- Black
BT green.
I am trying to wire up a new pyronix deltabell plus with the following connections:-
T
T
eng hold
STB
Bell
+12v
-12v

As far as I can work out:-
BT tamper return=2nd T connection
B- -ve hold off=-12v
B+ +ve hold off= +12v
BA bell trigger=bell

where do I connect - stb and +stb?????


Can anyone help please.

 

[Europlex]

stb = Strobe (Flashing light)

 

[sparkymarka]

dont forget to link 0v to tamper T1

 

[darren6645]

I'm well confused now?


I had the 0v down to be connected to the -ve 12v according to instructions?

Had guessed stb was strobe but I have -ve stb and +stb so which goes where?

Cheers.

 

[sparkymarka]

most bell boxes have a -strobe input only as the 12+ is allready connected via the pcb, there are some which need both -0v and 12v + most people link this in the bell box, as for the tamper most are -0v return ( old castle +12 return) so you need to link the tamper to -0v ok