worcester bosch 24cdi filler loop leak

[nicholas221078]

hi all
ive suddenly gained a drip for my filling loop from the right hand side where it slots into the diverter housing(no clamp or screws just pushes in with o ring) i have a set of bosch o rings,and i have replaced the said o ring 3 times now and each time it drips, i have greased the o ring before fitting,none of the 3 o rings look damaged,it just will not seal
any other tips or tricks would be appreciated
thanks in advance
nick

 

[nickso]

are you sure the filling loop isnt cracked? classic place for them to go if they have been disturbed.

 

[nicholas221078]

are you sure the filling loop isnt cracked? classic place for them to go if they have been disturbed.

hi cheers
ill check that tonight i did have a quick look yesterday,but didnt see anything ill look more indepth tonight

nick

 

[gas_man_gaz]

loads of silicone grease

 

[superdupergasman]

Sure you have the correct size o ring, there are loads of different sized o rings on this boiler.

 

[keego]

Forget the grease, use Fernox LSX instead.

 

[bengasman]

i seem to remember a couple of tiny capscrews to hold the filler in place

 

[keego]

They're on the opposite end to the diverter.

 

[nickso]

Forget the grease, use Fernox LSX instead.

do not do that.

lsx may have its uses but thats not one of them.