worcester bosch combi boiler model no 532

[albi969]

Hello All,

Hope someone can give me some advice as to how to refill/ recharge this boiler as the pressure gauge shows just under 1.0 bar and increases to just under 2.0 when there is hot water demand. Have had the system in around 2 weeks now, inst by BG at great expense. Is this behaviour normal for this boiler, do i turn the boiler off when refilling, the manual makes it look like brain surgery to a layman/ dunce like me. Also the hot water is slightly milky coloured , is this due to the system still having cleaner in it, after they drained it and refilled it

Hoped ive explained it clearly. Dont want to mess with it being gas !

Any advice greatfully received. model is worcs bosch 532

Cheers
Albi

 

[scatmanjohn]

HI... stop worrying it sounds fine. The milky water has nothing to do with any cleaners, its just air bubbles in the water.

If you still want to know how to repressurise the system read the "sticky"reference post

 

[albi969]

HI... stop worrying it sounds fine. The milky water has nothing to do with any cleaners, its just air bubbles in the water.

If you still want to know how to repressurise the system read the "sticky"reference post

Hi Scatman ...........
Some more info for you, have just run the bath and the pressure gauge dropped to virtually 0 bar, when there is no hot water demand the gauge has dropped to around 0.5 bar. I am more worried about this than the milky water as you say the water does clear if left , just dont want to get any nasty skin conditions.

Cheers
albi

 

[chrishutt]

Have had the system in around 2 weeks now, inst by BG at great expense.

Get the installers back to deal with any problem. There's obviously something seriously wrong.