Zanussi DW908 overheats

[barchetta_ms]

Model: Zanussi DW908 - 6 years old
Problem: Machine runs through initial wash cycle OK then does not re-fill during rinse cycle. Program stalls and machine heats up heating elements until glowing red (with no water in).

I have checked all inlet/outlet pipes. I have tried - as suggested in a earlier post - cleaning the syphons with no luck.

Any other suggestions most appreciated.

regards

Adrian

 

[tiredengineer]

You have a problem with the pressure system. It thinks it's still full of water. Either blockage in the pressure tubes or faulty pressure switch.



Unplug your appliance before working on it.

 

[barchetta_ms]

Many thanks for your prompt reply!

Could I ask if you know wether this is an economical repair job or not?, any sort of 'guestimate' on parts prices?

With a new machine coming in at around £200 (Beko from Argos) it's getting borderline with anything around the £100 mark for repairs wether it is worth it or not.

regards

Adrian

 

[tiredengineer]

Remember, you get what you pay for.
You'd have to contact a local repairer to get an idea of repair prices.



Unplug your appliance before working on it.
______________________________
lynda, moderator

locked to prevent hi jacking