Zanussi Washer Dryer

[Racquel]

Hi, Just wondering if anyone has come up with same problem. I have recently bought a zanussi washer dryer and 2 problems:
1. the all-in cycle that does most things (pre-wash, rinse,spin and dry) pauses after the prewash and the first wash and the flashing "pause" light comes on for me to "un-pause" it so the cycle can continue. It's annoying because it means I can't turn it on and leave it - I have to stay until the first 2 steps of the cycle are complete.
2. The clothes do not come out of the machine, having been through the drying stage for max 130 mins, fully dry. They are still a little bit damp. Is this standard for washer dryers not to fully dry the clothes? Currently I am airing the clothes to fully dry after I take them out of the machine which defeats the purpose of buying it. Before when I had the separate clothes dryer clothes came out dry enough to put straight on!
Are these issues standard with the washer dryer and if not how can they be fixed. Thanks...

 

[Sleepyhead]

It's still under warranty so if you think it's a fault then you need to phone them and report it. As I don't use the machines I've not much idea on the programmes, you'd have to refer to the manual to see if it's a feature or fault.

As to the drying, most washer dryers are 5 or 6kg wash and 2 or 3 kg dry.
If you're doing a full wash and onto dry then it won't dry properly as there's too much in it.

 

[Racquel]

Thanks for that Sleepyhead. Will do.