zanussi wjs1265 wont start
- Thread starter dsouzac
- Start date
Sponsored Links
i've only had to repair one of these with the same symptoms.
on that occasion it turned out that the door lock had shorted out.
i replaced the lock to discover that it still did not work. i then removed the lid and accessed the circuit board to discover that the door lock had blown a track on the p.c.b. a simle soldering in of a replacement link ( piece of wire) sorted the problem.
can't guarantee that yours will e the same but it worked for me.
one caution would be that if you repair the board and try with the same lock, if it is faulty the board may be more seriously damaged as you will have repaired the weakest point and risk causing worse damage elsewhere.
on that occasion it turned out that the door lock had shorted out.
i replaced the lock to discover that it still did not work. i then removed the lid and accessed the circuit board to discover that the door lock had blown a track on the p.c.b. a simle soldering in of a replacement link ( piece of wire) sorted the problem.
can't guarantee that yours will e the same but it worked for me.
one caution would be that if you repair the board and try with the same lock, if it is faulty the board may be more seriously damaged as you will have repaired the weakest point and risk causing worse damage elsewhere.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links