Zanussi ZKI245 Washer Drier Stopping early on drying cycle.
I have checked the dryer ducts, fan, filter etc. and whilst there was some fluff build up which I removed nothing was blocked. Both elements seemed OK R was I think about 86 Ohms, Drier is heating. Any suggestions please?
There are no error codes it just stopped with normal display after 8 mins of a drying cycle that I had set to 48 minutes. Did not appear over hot.
Does anyoine know of link to a repair manual for this item please?
I am suspecting a thermostat in the drier heating duct. Maybe the primary stat meaning the duct is overheating and triggering the safety thermostat. Anyone know which is which please?
I have checked the dryer ducts, fan, filter etc. and whilst there was some fluff build up which I removed nothing was blocked. Both elements seemed OK R was I think about 86 Ohms, Drier is heating. Any suggestions please?
There are no error codes it just stopped with normal display after 8 mins of a drying cycle that I had set to 48 minutes. Did not appear over hot.
Does anyoine know of link to a repair manual for this item please?
I am suspecting a thermostat in the drier heating duct. Maybe the primary stat meaning the duct is overheating and triggering the safety thermostat. Anyone know which is which please?