bathroom

Hi all, A builder gave my girlfriend a fixed price to do some work to her bathroom. Then once he took out the bath and sink, he changed the price. He initially told her the bathroom work would take 3 days, but it has now taken longer than that. Seems he is just holding her to ransom in terms...

We need to repair a couple of holes in chipboard flooring which is laid on engineered i-joists. Do you have any advice on how to support the square edges of the new chipboard pieces given the nature of i-joists? Unfortunately it is unclear to us how to attach support/noggins to these joists...

Hiya! My bathroom currently has 6 x 20w halogen (GU5.3 mr16) 12v downlights which are powered via 2 drivers, 3 lights per driver. 3 of the lights have been out for a while so after investigation it looks like one of the drivers has failed. These were installed by the previous owner. I want to...

Hi guys! Our bathroom doesn't have windows, so we need to keep the light and fan on after every shower. Luckily we never take long showers. But even we are being careful, we have mould between tiles as you can see in the pictures. I tried with white vinegar and bicarbonate, it helped a bit but...

Hi, We are looking to remove our square bath after purchasing a new property. The taps are against the far wall so we can't see if there is any isolating valves or get to the other side to see them. We don't want to go through the bedroom wall to access the pipes if we can avoid. Does anyone...

This is only kinda plumbing, and very basic - I do apologise for that. I have a wall-mounted 10cm timer extractor fan in an upstairs bathroom. In the trio of storms we had a couple of years ago the driving rain must have come inside as water marks have appeared all over the wall, and remained -...

I have 5 of these (see below) in my bathroom with the 90° lenses, and one has now failed and needs replacing. https://www.tlc-direct.co.uk/Products/LTFRD12DL.html I am having difficulty in finding a integrated fire rated LED down light that is both 90° beam angle and 5500K in colour...

I am a time-deprived DIY person near Gloucester. I want to refurbish a (very small) en-suite. I am prepared to do work myself - but, particularly with plumbing, and tiling, I suspect a professional would do a better job (and do it *much* quicker). My problems are: While I've visited retail...

Getting my bathroom redone has turned out to be a cursed project. Every few days something else goes wrong. The new pipes that lead to the bath taps started leaking overnight, dripping through the ceiling below. Fortunately ? the floorboards are still partly up so I could see where the leak is...

Hi, Will be taking up my floorboards in an upstairs bathroom and fitting caberflooring of which needs to be screeded to be made level as it's about 11mm out. I've bought Mapei Ultraplan 3240 Self-Levelling Compound 25kg...

Hey all! I'm new to plastering. I'm renovating some large property by myself and learning a lot of plumbing, some minor electricity, woodworking, metalworking, glasswork ext. It's going great as I'm putting 24h a day researching how to and working :) I'm getting really better at plastering...

Hi all, I’d like to get a vanity cupboard installed under my current sink - if not possible would like to get a new sink with a vanity unit attached… Is this possible with the current set up whereby there’s boxing in work covering the pipe work from I believe the bath and also the sink itself...

I have nearly finished my downstairs guest toilet/bathroom and would like to give it a nice touch with ceiling coving. I know it’s not an issue reading previous articles on here but I am unsure which one is the most recommended due to humidity? I don’t want to have too much mess if I can avoid...

Hello. Was wondering if anyone can help. Just had bathroom done and the fitter installed an inline Osily extractor which, quite frankly, is useless! So I've replaced it with a Manrose MF100T which is far better. However, the Osily has a N, L and LT connection. The Manrose has a N, L and LS...

Hi all, I have the sink as attached. I want to change the 2 single taps to a mixer tap. Is this possible for bathroom sinks? Without changing the sink itself. Thanks

New member here ! I'm sorry if this is a really silly thing to ask but painting over a horrible paint job in a new property we purchased in Greece. I've been given an emultion which I had to add 10 percent water too, here's a photo.. Is this all going to wash off the second i use the shower...

Hi, I have a small space (1200x2800) for a bathroom. the back of the room (on the external wall) will be taken up with a shower and shower screen (The ones with the left side static and the right side slides open). I need to get the waste pipe from the toilet through the external wall to connect...

Hi, I had a new bath/shower installed and recently noticed that I can no longer open the bath/shower screen outward (I often just step around it anyway).. I noticed that the glass screen appears to have dropped lower so it is blocked from opening by the metal frame attached to the bath. On...

Hi, I recently had my bathroom renovated and in the past month or two I've noticed the wall appears to be blistering quite badly. Initially it was minor but it has gotten worse in recent weeks. The blistering is happening in just one place... by the side of the bath with overhead shower (with...

Hi all, I am looking to buy a brand new Traditional Bathroom radiator (Seen in my attached image) but the amount available online is mind blowing so was hoping someone could give me good advice what is a good brand and what should I avoid. Here the criteria: 1. Measurement around 600mmx900mm...