door

Hi I've got an door canopy over the front door which stands on wooden posts. Not sure what type of wood as it was put in by previous owner. The wood on the posts is looking very weathered now, see attached photo. Was wondering if anyone could advise what needs doing? Is it that it needs some...

Hi, I got my internal porch door which I 'm unable to find the key anymore. The door is already unlocked but the cylinder won't come out as usually the pin inside keeps it stuck. On youtube, a guy snaps it on both sides but to be honest I'm worried to apply a lot of force as I will be damaging...

I know could sound a very stupid question but I have removed my old door and would like to order new ones. I have the structure opening dimension at the moment and don't trust the old door as it ms like they were customized in size. For instance, what would be the difference between structure...

Hi chaps I just got some dark grey undercoat from bnq and have done my backdoor both sides its a nice color but I didnt know they gave me just undercoat lol, so I now need a good dark grey satin paint to finish, (the same color they are doing on new builds windows). The undercoat I have used is...

Hi - i was wondering if anyone on here knows where i can get a replacement for the attached. I don't know what its named under so am stumped with getting a replacement. Any help would be grateful.

Hi, So I just got a new lock installed, and for some reason when the thumb turn is turned all the way to the unlock position, the deadbolt goes in and then comes out again by about half a centimetre causing the door to lock again. It's then almost impossible to move save for a bit of wiggling...

Is there a quick and simple fix for a Shower door (curved) that keeps coming out of its runners? I have attached a photo, but most days, this keeps popping out at the bottom, and it needs to slide back in to its runner, which can be tricky? If there are any tips, to keep these 'on track' then...

Has anyone got any ideas on how I could make a cover for stone door cill (internally). It's an old 9" brick house, and the cill is constantly covered in condensation in the winter months. I've got a large piece of DPM over it currently, but it's unsightly. I need to make a kind of step, which...

Our front door has recently started not closing properly. Well, it closes ok, but when you try to lock it, there's a lot of resistance. You have to lift the door via the handle as you turn the key for it to lock. The door seems to have dropped on the right - the handle side. The sections of the...

I have broken the Door handle on my Washing Machine the model stated above. Do I have to buy a complete new door or can you just buy the plastic part? The picture below is not the exact model but the panel is more or less the same.

Hi, Currently looking to move my front door, as you can see from the picture the original door is set back giving an open porch under the house. It’ll be set back slightly in that opening, which has now been narrowed to suit a standards door width. Question is, does it need a plastic...

i can greatly appreciate some advice. I’m building double story extension and architect told me I need hallway on the first floor which is about half the width of the room. (I’ve attached current design, pls see yellow circled area.) 1) what is the min requirements for building reg for the...

Hi DIY-ers, I want to repair the wooden frame around a badly installed lock. I am happy for the lock to remain, but am not sure how best to fill the badly carved out gaps in the doorframe around it. See pictures to understand. The largest part is 3cm wide X 2cm deep. I've thought of cutting...

Hi Working on an old bungalow renovation - Kitchen is very very cold, have noticed that a pvc door that was previously installed is very draughty and cold... rest of house is warm but this particular corner of the kitchen is barely getting heat despite being 2 foot from a rad. Door install is...

I had this door put in but it was all a bit ad hoc so the door reveal was too wide and some add-on pieces were put on (I don't know what the correct term for them is). The interior emulsion is starting to spot with mold along the inside of the frame so obviously it isn't sealed. I think the...

Hello, I have had some carpets (and underlay) installed. However the carpet to carpet threshold bars the fitters used give some pretty steep “ramping”. So much so it gives quite a noticeable “trough” at the door thresholds even though the underlay is cutback underneath. Therefore has anyone...

I'm putting up some stud walls for a new bedroom and looking for doors matching this original one, does anyone recognise it? I visited a new build office that has the same ones recently so they're definitely still being made. Thanks for any tips! IMG_6992 by maxidog posted 4 Oct 2019 at 10:37...

I have a sealed magnetic contact connected to the Accenta Gen4 on my wooden shed door, I replaced it with a sealed metal contact on previous advice near 2 years ago. Previously I used the standard white plastic contacts and even tried a heavy duty contact for a gap that is always near enough...

48" front door removed, that wall is now internal. The outer leaf was conc. and the inner leaf is breeze. As I need a conventional internal door there now, does it make much difference if I narrow the doorway using Celcons, or should I stick to conc. Thanks, Dain

I’ve recently moved into a property so it’s my first effort at any kind of DIY. One issue we have is that the garage side door has rotted at the bottom, it doesn’t look like it was provided suitable protection. What is the best way to do this? I’ve heard of epoxy fillers but will this be...