drayton wiser

Howdy. I'm hoping that someone with a bit more knowhow can help with a quick query for wiring in the 2 channel wiser hub. I'm aiming to replace an LP822 programmer, seems straight forward in terms of the back plate but it leaves with me the query of what to do with the RCR10 thermostat. The...

Hello I have installed the Drayton wiser hub r and have connected it to the dual digital thermostats. Whenever I increase the temp on the thermostats the little flame appears, and the LED for heating on the hub r lights up but the central heating on the boiler does not come on. We do not have a...

Hi All, I am looking to fit Drayton Wiser thermostat with my combi boiler. Because Controller is on the Combi boiler. I have only a temperature controller where i can set the temperature for the house. I have clicked some images after opening my combi boiler. Things which i learning that i need...

Hi, I'm replacing my Siemens for a Smart Drayton Wiser hub and need some assurance that I have wiring correct, The Siemens is currently connected with 4 wires Blue to Neutral, Brown to Live, Black to L1 and Grey to LX, see attached pics. The Drayton Wiser hub back plate will have Blue at N...

Hello, this has probably been asked a thousand times already, would appreciate a few pointers or corrections before I go ahead as I'm a little nervous although confident in the set-up. I currently have a combi-boiler wired to a Honeywell R6660d Relay Box (thingy?!). There's a wireless Honeywell...

Hi Folks, I need some help with replacing an old Danfoss TP5 wired thermostat with the "Drayton Wiser multi-zone kit 1". Current setup: Danfoss TP5 wired thermostat with two wires connected to it. Please see photos. Boiler: Worcester condensing Boiler: Greenstar 24i JUNIOR combi MK 4 I spoke...

I have this boiler Greenstar42CDi GC NUMBER 47-406-10. It is controlled by a Worcester Digistat wall mounted remote thermostat / controller. The boiler itself has a control panel on it's front face, but I have never used this. I have recently purchased a Drayton Wiser Thermostat kit 1. I want...

Hi Guys i'm new to the forum. I have bought the drayron wiser as well. My existing glowworm felixcom 30cx has an additional 'switching live'(SL) terminal. On the new wallclock provided by drayton wiser there is N L 1 2 3 4. My question is where should i connect the SL wire on the drayton wiser...

Sorry- yet another smart thermostat wiring question. I want to install a Drayton Wiser two channel system. I currently have a Honeywell wireless thermostat (connects to a R6660D) controlling my central heating. I have a Honeywell wired timer (ST9100c) controlling my hot water cylinder. I have...

i’ve just invested in a Drayton Wiser smart thermostat and am considering whether this is something I can install myself. My boiler (combi) is less than 2 years old and is controlled by a wireless Honeywell thermostat at present. The receiver I need to replace is a Honeywell BDR91 wireless...

Hi I've just bought a Drayton wiser to replace my Lifestyle LP241. The old controller had a universal backplate and the central heating is controlled by a wall thermostat. Can people just help me make sure I get the new wiring correct? Want to disconnect the thermostat as suggested in the...

Hi I've just bought a Drayton wiser to replace my Lifestyle LP241. The old controller had a universal backplate and the central heating is controlled by a wall thermostat. Can people just help me make sure I get the new wiring correct? Want to disconnect the thermostat as suggested in the...

Hi, Looking for advice to confirm how to wire up a new Drayton Wiser 1 channel smart thermostat to a Worcester Bosch CDI30. This will replaces an existing Drayton LP20RF dual channel digistat and wireless thermostat (easily removed). As there’s no existing wall plate I need to wire this in...

Hi, We moved into our house in 2015 and had the old boiler removed and a combi fitted. The old system had water tank in the loft and cylinder on the 1st floor in a storage cupboard. The new boiler was installed in place of the old boiler and the cylinder / water tank was fully removed...

Hi I have a cpl of question, but I'm also posting as this might help others trying to get Drayton Wiser to work properly with Vaillant (or other boilers). Setup: ecotec plus 418, S plan, installing Drayton Wiser smart controls (currently 3 rad valves). Problem: the boiler is short-cycling...

Hi guys, I'm installing my new Drayton Wiser kit 3 to replace my existing Danfoss system (TP9000 downstairs and TP5000 upstairs). When reading the manual it says " If there is an existing wired thermostat, it must be completely disconnected, i.e. remove the thermostat wires from the wiring...

Hello all just looking for some wiring info on Drayton Wiser 2 Channel programmer and Im moving from Honeywell ST699 so sadly not a usable backplate. I wired up the Wiser (I hoped) using the wiring as shown in wire diagram. System switched on fine. When I held the Heating button for 3 seconds...

Dear all Novice to plumbing and electrics. Interested in getting a smart heating system for my flat, and after considering Hive, Nest and Tado, narrowed my choices down to Drayton Wiser or Honeywell Evohome. I was going to go for the Drayton Wiser, and was planning how to install it. My flat...