enforcer

Hi, Less than a year ago I installed a pyronix enforcer into my house, with a few sensors and a wireless siren externally. Recently, the alarm has been randomly sounding internally with an alert to say that "Wrls Poll Fail - Siren 1". The siren hasn't sounded for any long periods of time...

Hi, I have an Enforcer V10 system and have been looking at adding the new Pyronix Wifi Cameras (specifically the outdoor mini-domes). I was wondering if anybody has any experience with them (as they are so new). I know they have a sd card and you can access the video via the new app just...

Hi all First time poster here. I recently bought a Pyronix Enforcer kit for a DIY install. I've wired the Enforcer V10 to the mains and connected the battery and every other connection. All seems to working fine but the Digi-WiFi doesn't seem to be registering. There are no options in the...

Hi, I am looking for some guidance on how to wire an internal sounder (twin/quad piezo) to a Pyronix Enforcer panel. I believe the programmable outputs are rated at 70mA which will be insufficient for the sounder requiring 100-200mA. The installation manual states under 2.1 technical...

Hi, I am looking for some guidance on how to wire an internal sounder (twin/quad piezo) to a Pyronix Enforcer panel. I believe the programmable outputs are rated at 70mA which will be insufficient for the sounder requiring 100-200mA. The installation manual states under 2.1 technical...

Hi i am the very last version of Enforcer 32 with software V9 (V9.54) i have a compatible wireless alarming pad (keypad) Hallway door contact 3 PIR's a wireless Key fob for the bedroom 2 nfc fobs for me and the mrs. Just changed telephone supplier and had to rewire the damm PSTN connection...

Hi guys, I was wondering if someone could help me, I have a Pyronix Enforcer V10, and I would like to connect TWO internal Pyronix Sounders to the system but I am unsure how to connect to the internal IO board, or if to connect any resistors? I do not currecly have any other item connected to...

Hi All, I have almost completed a Pyronix Enforcer alarm install and all that remains is the external Bell which has got me stumped. I do have an existing wired bell outside the house from an old alarm that is no longer connected and would like to reuse it. The old bell cable was wired to...

So I am at my grandparents in Maidstone installing a Wireless Pyronix alarm in their bungalow. To run power to the panel, I take a 1mm² T&E from a junction box in the loft (what is on one of the lighting circuits) to the FCU and then to the Pyronix panel. First check for power at the panel and...

I am tried to install a Pyronix Enforcer. My electrician has done the following: The main power from the house consumer unit is using a 10amp fuse circuit and that goes into a spur switch which is then wired into the Enforcer. When I switch on the spur switch to power up the Enforcer the relay...

I am tried to install a Pyronix Enforcer. My electrucian has done the following: The main power from the house consumer unit is using a 10amp fuse circuit and that goes into a spur switch which is then wired into the Enforcer. When I switch on the spur switch to power up the Enforcer the relay...

Hi guys, I’m really hoping someone can help me with this My Pyronix Enforcer has stopped working properly. It began with a false alarm whilst I was out all day (pet got into living room), alarm sounded as normal - neighbour called me to let me know it was sounding. This went on for most of the...

As a self-installer I'm just getting to grips with the kit & I see that the wired 064 keypad has 2 inputs. Can I use these for PIR's or door sensors when the keypad is connected to an Enforcer control panel? My confusion stems from the manual saying the Enforcer can have 66 inputs... that is...

Hello, How do you configure your enforcer with smoke detectors, and particularly the bells? My issue is that false alarms on smoke detectors happen. Should i have the full bells and whistles when it does?

Hi all, First post here, I'm new to alarms but I've been reading up on these forums for the past week or so and I'm wondering if someone could help me a little bit. I'm about to move into a new property and I would like to install an alarm, it has to be wireless as there is zero chance of a...

looking for some assistance with a small issue i have. i recently self installed the enforcer home control + panel, 3 PIRs, 2 door contacts, remote keypad, and delta bell. everything generally works fine, my issue is the volume of the tones from the main control panel. i have tried adjusting...

Hi All Just fitted my Pyronix Enforcer and all went well (well except a shock when i pulled the tamper wire out of the bell box whilst standing on my roof! anyway...) I have a few questions 1. The Pet friendly PIR's seem to not flash very often at all, in fact I can walk from the front to the...

I have had my Pyronix enforcer HomeControl+ system for about 14 months now and am just wondering how often do you professional people change the battery's in the PIR's/Door sensors? I have the PIR's LED's disabled, although would not expect that to make any significant difference to the battery...

hi looking for some advice with a few queries I have. I am self installing a pyronix homecontrol+ panel, 3 PIRs, 2 Door contacts, wireless Keypad, delta bell. I have installed a few wired system in the past so have a basic understanding of what I need. I have the system setup on a bench to...

I have it all working. setting 6, gives me the notification sms message alarm has "gone off" my question is the panel calls a number to check the CHC / sms gateway number once a month. i read somewhere you can deactivate /disable this, dont wanna be paying premuim rate numbers as often. I...