hive active heating

Can anyone offer any help with my Hive underfloor heating in my kitchen please? I have two hive zones. One for the house and one for the UFH in the kitchen. The UFH has a separate Hive receiver next to the UFH manifold and this is triggered by a Hive thermostat in the kitchen. When I boost...

Afternoon, I recently decided to install Hive active heating (thermostat + receiver + hub) as the old thermostat was making a buzzing noise. I managed to set it up and HW works fine, but the old room stat (which itself is disconnected now) or rather it's existing wiring which is still connected...

Hi all, I thought I had this all wired up correctly but it's not working. Images attached are the hive receiver wired in to what was previously the wires for old fashioned basic thermostats. Then the inside of the boiler and a plug that was connected to an old timer inside the boiler. If...

I recently installed a Hive Active Wireless Heating package, but am having trouble with the system communicating with my combi boiler and would really appreciate some help. I'm not a certified electrician or plumber, but electrically competent, and think I'm 90% of the way there, but Hive won't...

I see a lot of people on eBay selling only the receiver for their Hive Active Heating without the thermostat. Assuming I have the hub, does this actually work? Can the heating be controlled with the phone app alone? What happens if e.g. the thermostat breaks or runs out of batteries?

Sorry, I really have spent about an hour looking online for the answer and just can't find anything. Boiler = Worcester Greenstar 28i (dial/timer in the middle) Old thermostat = Siemens Landis & Staefa RA02 New Thermostat = Hive single chanel active heating. The old thermostat is in another...

Hi all, I would like to replace my current timer and thermostat with the Hive heating and hot water. My current timer is a Landis and Staeffa, boiler is a potterton netaheat ( very old) with a thermostat in the hall. Wiring the hive seems straight forward as connections seem the same...

Help! I'm trying to install Hive active heating 2 to replace my existing system but I'm not too sure on the wiring, I've found tons of guides and posts about this already but I'm not able to transfer the solutions to my setup. This damn wiring is starting to infiltrate my dreams so any help or...

Hi, I've installed it as per a previous post on this but it still only seems to fire when I press the hot water button. When turn up the heat, nothing happens. Photos show the previous receiver wiring with this new one. In N, L, 1 and 3 as shown before

Hi Guys. I have seen few posts on here and other places but could not fit one to my system . The house doesnt currently have any thermostat or heating control system connected , so its a fresh instal of a Hive Receiver which I have purchased and althought I have some DIY experience and this...

Hope you are all well. Am trying to install a hive active in my flat with a combi boiler. I have a Honeywell timer ST6100A with a frost room thermostat and a combiner's boiler 24i green star junior. The timer controls hot water and the room thermostat controls central heating. I need help wiring...

Hi sorry i’m new here but saw some Great advice. I have a new Hive system but I'm struggling to install, trying to replace an RWB7 (pic 1 and 2) with my Hive controller which is located on first floor but also have an SCR wireless receiver (pic 3 and 4) in garage (floor below) and an RF3 (pic5)...

I have a Greenstar 36CDi combi boiler with a Hive (single channel) thermostat. There are two circuits, downstairs & upstairs - the Hive controls downstairs and it works correctly. We don't use the heating that much upstairs, maybe boost it for 30 mins every now and then. I presume I could...

Hi, I have today wired up the Hive thermostat, receiver and hub. Connected up the wires how they were on the old receiver and now the boiler is not working. Works from the main thermostat to receiver, but doesn’t action the boiler. Have now taken off the plate on the boiler and can see...

Hi all Desperate to replace the pretty rubbish Geo Cosy system that we got for free a few years ago when we switched our electric supplier with a nice new Hive system. I’m in a better place than most for this as we had a Worcester wireless thermostat originally and the engineer had to...

Hi all, I bought a Hive active heating system to replace the current set up which is the EPH wireless receiver WRS1i for my Worcester Combi boiler. I thought (perhaps stupidly) that the set up would be easy and I could avoid a BG install! When I opened the EPH receiver I realised I'm actually...

Hi i bought hive dual channel for my combi biler (POTTERON PROMAX COMBI 33 HE A) by mistake. At the moment i have centaurstst 7. Could you please advice how to connect the hive dual to the combi biler. see pictures Thanks

I've bought my HIVE in the black Friday sale last year and have been waiting for the local plumber to install but he keeps fobbing me off.... so can anyone advise me on how to wire this up.... I've been through all the usual tutorials and can't make sense of them because they're all different...

Another Hive question sorry! I've searched the forums and can't find something quite like my question... I have just got a Hive 2 heating (single) and installing on Ariston E-Combi Evo (with a mechanical clocker/timer) This is what it looks like... Is it as simple as connecting 1 to L 2 to...

Looking for some advice? Installing a Hive Multizone in a property. It has the Danfoss programmer. See attached wiring for it; Would I wire this like for like as per the Hives instructions and just remove and cap the remote sensor. See attached photo? Then would I get the single channel receiver...