hot water cylinder

Hi, I have a Worcester Bosch 35cdi System boiler with optional diverter valve (diverter valve enables it to be used with a hot water cylinder). The control package is via Tado and integrates via the Worcester EMS bus system. My issue is that when the system is heating the hot water tank, it...

have an old system, large water tank and small f&e tank on loft, hot water cylinder on first floor, boilder on ground floor (Ideal Mexico Super C 125, vintage 1987, works well though had new stat put in recently). Would really like to just change HWC and leave everything else in place, though...

Hi All, Hoping someone might be able to solve this conundrum. I have a hot water cylinder with a boiler. I recently drained the system and washed out the radiators. I have no hot water and no heating. The boiler fires up, the 2x two port valves turn the valve to their open position. The...

Hey Guys. I have economy 7 in my Flat - Which seems to work out very expensive (When i have 3 storage heaters on it is around £6 / £8 a day!). I have 3 Storage Heaters (Lounge, Hallway, Bedroom 1). There are also Panel Heaters in the Lounge, bedroom 2 and 3. The hot water comes from a...

Blocked water supply in house by mistake, then got it back, followed suggested routine, start from highest outlet down, supply restored but since then f&e tank overflows, ever so slightly, occasionally the overflow stops but during 24 hrs about 3-4 buckets collect. Get conflicting advice from...

We have a hot water tank with the overflow going outside. Ive noticed the ground outside is always wet. I then realised the water is coming from the hot water tank over flow. Its not constant but clearly happens regularly. Our heating is topped up from the small tank in the loft. The hot...

I bought a flat recently; it’s all electric with no access to the gas network. I had an electric central heating system installed this year. The boiler is Potterton Gold 9Kw and the water cylinder is an Elson Zircon ZD 150 Direct Unvented. There has been banging coming from the cylinder. For...

My indirect HW cylinder has a top mounted immersion element labelled “Shel CODE XB270”. Does anybody know how long this is? The cylinder says “Max length immersion 760mm”. I suspect that the one fitted is much shorter than this and is only heating the top portion of the cylinder.