problem

Hi all, hope this is the right place for this.. but I was hoping I could get some help. Im fixing two 5kg shelves (string pocket shelves) to the plasterboard wall in my kitchen. It's a new build flat and as I've found out today - the studs are metal. I wat going to use grip-it fixings for...

hi everyone i've got a problem with my alarm which i've put up with for the past few years, but now it's really starting to annoy me! it's a scantronic i-on 40. i've got 2 door contacts and 3 x PIRs. the keypad is in a cupboard in the hall, which is protected by one of the PIRs. it's...

Hi guys, I’m really hoping someone can help me with this My Pyronix Enforcer has stopped working properly. It began with a false alarm whilst I was out all day (pet got into living room), alarm sounded as normal - neighbour called me to let me know it was sounding. This went on for most of the...

Hi everybody, We have a washing machine INDESIT (perhaps with another brand in other countries), model XW A 71252 W EU. During 30 months it has gone right, but two monts ago, after 30 minutes running on whatever washing program, it stops with all LEDs flashing. We did a complete reset. Then...

Hi All, I have recently purchased a Nest to install alongside my combi boiler. My boiler currently does not have a thermostat, it has a timer / controller on the boiler that I use to turn on / off the CH. The thermostat connections on the boiler are 'volt free' and currently there is simply a...

Hi i have a very old Vaillant and its done me very good service but now go a problem When DHW is demanded the boiler does not fire up at first I thought it was the differential valve not sensing the water pressure but the pin was moving and the micro switches were going over the CH is fine but...

Hi all. I have the seemingly common fault of my Miele T294C dryer shutting down after 5 mins of blowing cold air and beeping on all settings. BUT! If I wipe / clean the door interior seal down (on the machine body side not the actual door) it will work??? Would appreciate any pointers as to...

Any Help would be appreciated.... My boiler is 7 years old and is as above, an Ariston Microgenus II 31mmfi combi boiler (yes, I know they are cheap but it came with the house). I had to replace the PCB a few years back as the whole thing packed in and it ran fine for a while after this but...

Hello all, just came across this site and it has a wealth of information, so thought i would sign up and ask a question which is a bit of a dilemma i am facing..! hopefully someone in this forum may shed some light.! Background: 4 bed detached house, with an existing 4m single storey extension...

I have a Vaillant 831 boiler which is not heating water. It is 4 years old and has had a diverter valve changed 2 years ago. It was working last night but this morning it has stopped heating the water. The central heating is working as it should. When a hot water tap is opened the flame symbol...

Hi all After some suggestions on a problem I'm having with my combi boiler, its a main combi 24 he. The problems occurs mainly when running the kitchen tap or the shower, the hot water runs for a few minutes and then goes cold for a little while and then back to hot again, and does this...

Hi I have a Grant Vortex Pro 36 Electronic Condensing Combi Oil Boiler (PDF Manual is here). For the taps the hot water delivery is immediate and as soon as the hot water tap comes on. It's hot as soon as the length of pipe is flushed out. Radiators are sometimes almost instantly hot, as soon...

hi im new here so not sure where to put my post so first HI all and ill try to post some pictures basically the guy installed the frame less door on the end it has magnetic strip which should match the strip on the side when its closed but you should see its miles off and gap on the bottom and...

Hi, I've had no shower for 2 weeks now... Aqualisa can't come out for another week, so I'm hoping someone here can help me fix it myself! The shower came on as usual, but wouldn't get hot (a tiny bit warm) then it just cut off. But the power light on the control was still red. I've tried...

I have the above programmer, but it is currently causing problems. When it is set to HW only it runs fine no problems, however when I switch to CH on was well the programmer will trip and go dead after a couple of minutes. To get it working again I have to press the reset button but it will trip...

We are busy renovating a property built in the 1930s. As we go along we inevitably find things that are a bit surprising, forcing us to change our initial plans. We would like to ask for advice on what the best course of action is to clad the upstairs area under the roof. The situation The...

forgive the basic errors I'm not an expert on any of this. We have a hot water tank and gas central heating it is controlled by a dial thermostat and a Honeywell st699. The one day two cycle one... If the system calls for hot water OR central heating then there is no issue and it works fine...