timer

  1. N

    SIEMENS RDJ10 TIMER/TEMPERATURE

    Hello. I have the current times set: [A1-ON] - 06:00 [A2-OFF] - 08:00 [A3-ON] - 17:00 [A4-OFF] - 20:00 Currently heating will only turn on if time current time is in-between either A1 & A2 or A3 & A4 only if the temperate is under a certain temperate (setback) How do I make the heating turn...
  2. andyr123

    Wiring up 4" Extractor Fan with Timer & Humidity sensor just for Humidity mode

    Hello - I have this 4" Extractor Fan with a Timer and Humidistat circuit board in it - there are 2 adjuster screws (pots) and one is for timer, one controls humidistat. For using timer you need 3 wires, 1 neutral, and 2 Lives (1 switched live, 1 permanant live) - the wires I have coming into the...
  3. Sharon Davis

    Ecotec pro 28 - pressure doing my head in!

    had this boiler for a while and become a pro at both filling the pressure and releasing pressure over the years (mostly thanks to this site ) So my latest woe is: Last week turned on heating, checked pressure all fine. Switched to timer for some morning heat, but nothing happened. Checked...
  4. eveares

    Ad-hock/Clip on Security Light Switch - Genius or Dumb?

    So was looking through a nauticalia catalogue and saw this item, a security timer light switch that fits over a normal existing UK light switch and does not require any re-wiring of the existing light switch. Advertised as being compatible with single, double and triple light switches. Just...
  5. G

    Bosch Washer dryer "Finish in" time

    I've just bought a Bosch washer dryer WVH28360GB. I can't figure out how to use the delayed start functionality correctly. Let's say it's 11pm and I want my program to finish at 7am, then I enter 8 in the "Finish in" function. Well unfortunately it's not so easy and the washer regularly starts...
  6. N

    Timer woes

    Hi I've just bought a house that was previously rented and I'm in the process of moving in. The boiler is quite old (has a pilot light) and will be replaced eventually but not straight away. I've managed to get everything working, but the timer (lp722) has been set up in such a way that you...
  7. eveares

    Timeguard 24hr Immersion Timer and 70W HPS light?

    My granddad wants a 70W HPS lamp fitted under a big tree in his garden and so I have gone ahead and order the required parts. The key parts being a TimeGuard NTT01 24hr immersion timer, a Photocell, and of course the 70W HPS light fixture. Wired like so: Fused Spur > Timer > Photocell > HPS...
  8. cbthomas2006

    Dimplex heater won't turn on after reset (timer issue?)

    Hi, I have a Dimplex panel heater of unknown model (but it appears to be old), and the manual has gone missing. The unit appeared to stop generating heat while switched on, so I pressed the Reset button. This made a click but then caused the lights in the two red switches on the side (which...
  9. D

    Boiler switched off but still coming on!

    The other night, our central heating came on at around 2am, it was timed to come on at 6:30am. After some investigation, we realised that it was not being controlled by the boiler timer and was effectively on all the time after this, even though it was switched to "Timed" We have Worcester...
  10. N

    Questions on: Immersion switch replace with timer

    I want to install a TimeGuard inline immersion timer (model NNT03 as here: http://www.timeguard.com/products/time/immersion-and-general-purpose-timeswitches/ntt03-24-hour-7-day-compact-electronic-immersion-heater-timeswitch ) in the airing cupboard, for summertime immersion control (use boiler...
  11. R

    RWB7 timer help please?

    Hi, I'm trying to change the on/off times on an RWB gas heating time, but all I get is the flashing 12am. I've printed out and checked instructions but nothing seems to work. I've pressed the reset button with a pen, slid the switch to 'clock' to set the time, but the time+?/time- buttons do...
  12. GoodOne

    Horstmann 425 tiara timer not moving/working.

    Hi, i replaced the old cover with a new one without replacing nor disturbing the back plate setting. However, the timer still does not work as it was not working before with the old one. Reason for me to change it because i would like to use the timer. Any advise would be appreciate.
Back
Top