wall

Evening! I've recently run into an issue with LAP 10AX brushed stainless steel light switches I'm fitting at home (with the help of my old retired sparky dad). Despite having a flat profile, they aren't sitting flush against the wall. Strangely, they seem to be bowing a bit. I've attached a...

With the 2023 building regulations changes it looks like the external wall width (from exterior brick to finished plastered internal wall) for a new extension would be: 102.5mm - exterior bricks 150mm - cavity for standard insulation (unless using some higher performance / more expensive...

Hi all, I'd like to paint one or two walls in my living room green, but the room doesn't get much natural light (and those walls are the darkest). I found a photo online of the colour I'd like to paint it (attached), but all the samples I've tried look way too dark in the space. The lightest...

Hi all, We've a smelly kitchen, tiles starting to fall off. Walls are rubblestone, uneven, plastered (some tiled) We don't currently have an extractor -One underground wall is studded out to halfway along it, boarded and tiled - we've not yet had the units off to see behind, but suspect damp...

Hoping for a bit of advice. We have a single garage not attached to the property, but shares one wall with the neighbours garage. Since it’s too small to fit most current cars, I’m looking at converting it to an office, and to do this would require blocking up the garage door, which I’ve come to...

I had a Brantia internal washing line for maybe ten years until one day it came crashing down due to the weight demands put on it and it pulled the plug on one side out of the wall with a bit of the wall as well. The hooks on the other side were just fine, but on the other side there is a metal...

need to paint this wall but not sure how to make good first as paint came off leaving 1 or 2 mm difference. Any tips would be appreciated

Hi all. This has been coveted in similar ways a number of times. My other half lives in a flat that has dot and dab plaster board walls. Some time ago I decided to use reclaimed pallet wood to make a feature wall. The wood is secure with nails on 5 1.5" x 2.5" buttons running vertically...

Hello. Got a Ring floodlight installed today and the traders have broken the brick on which they installed the mount (not saying anything to me afterwards). I understand you can drill outdoor brick without damaging it. Would this prove to be poor tradesmanship from them? Is the cam secure to the...

We've started renovating our kitchen and we're wondering whether we can safety remove an internal wall The wall itself does not appear to be supporting anything and runs in line with the joists above and there is no wall that runs directly in line above. We have blocked the side door In the...

Hello all :) Never built anything big before. I'm want to build a masonry 15m2 outbuilding as a gym. I want to use the building all year round and I can imagine a lot of body heat being generated. I plan to have an electric heater too for winter. I have two wall designs I would appreciate...

The top corner of my kitchen wall started to crumble a bit. I used a paper scraper to remove it. There is a radiator/water pipe behind this section of wall. The pipes have turned green but are not wet. In fact, nothing there appears to be wet, but that corner of wall is almost dust now. I have...

We are in the process of buying a property and this seems to be a problem raised by a surveyor and we would like to resolve it. The extension was built on the main building but the joint bricks do not align. After speaking with a builder been told this is not possible. As bricks are sticking...

Hello, I am a FTB and offer has been accepted already. During the building survey, the cracks have been mentioned in the report and I am not sure how severe this is and how much this would affect in terms of cost and the structure of the property, safeness, etc. Two storey extension towards the...

Hi I’ve got 3 different types of wall to batten. Just wondering what the best approach is going to be (mainly which wood to get) Wall 1: Batten wall on single skin brick to hold 100mm insulation for garage conversion. From reading round the forums it seems 50x100 c16 is the way to go. Wall 2...

Hello all, Just chased a wall for a piece of trunking 50x30 for a media outlet and didn't realise the wall was hollow blocks until too late.....doh! Don't think it will make a structural prob as its vertical and still has the other side of the block and the brick for support but should i fill...

Hi all we have this wall in our house which seems to be covered in a polystyrene foam. Any idea why it would have been added? Seems to have been picked apart for some time and seems very easy to remove, but no signs of damp so wonder why it would have been added?! Insulation or to cover...

Hi Everyone, I`m rising my patio to make more large area to the same level and need to build an L shape retaining wall 750mm tall. We have used a bricklayer for some job in the past but look like they have now completely lost their mind. Waiting time 2 month from we book them in and cost...

Hi, I'm coming to the point where I will actually need to get some concrete in. I like the idea of volumetric concrete so that I pay for what I use. I need about 1.2 cubic metres of concrete and will have to barrow it. Having phoned a few people up there seems to be a big difference in price...

I removed our old kitchen cupboards yesterday and found the ring main has been joined using two choc blocks covered in insulating tape in an open cavity in the plaster behind one of the cupboards. What is the correct way to join those cables please? And can it be plastered / covered over or...