wireless

About 12 months ago I fitted a Texecom Premier Elite wireless system. The system commissioned without any problems and walk test was fine. The system consists of 6 PIR's, 4 Dual and 2 Quads. Since then I have had 4 false alarms, all on the Quad PIR's . The first 2 (about 2 months apart was on...

Hi all, I think this is be a fairly simple job but just want to make sure I'm doing what I think I should before I go ahead with it. I need to install a wireless Nest thermostat (so not connected directly to the boiler). I have a Baxi Duo-Tec 28 HE a combi. Currently I have a Salus wireless...

Hi, I can't get my head around this and I'm wondering if any of you can help me out. I currently have a Worcester Heatslave 15/19 Oil Boiler, it is controlled with a Programmer in the Kitchen, where I can tell both the Hot Water and Heating to come on, and set times for weekdays and weekends...

Hi all, long time listener, first time caller. I have a Friedland visiocam 46603pl, 2.4 ghz wireless monitor, ed1. \It has 2 units, the doorbell with the camera and the remote video screen which will show video of person who pressed on the doorbell for 30 seconds. I would like to tweak the...

Hi all, long time listener, first time caller. I have a Friedland visiocam 46603pl, 2.4 ghz wireless monitor, ed1. \It has 2 units, the doorbell with the camera and the remote video screen which will show video of person who pressed on the doorbell for 30 seconds. I would like to tweak the...

Hi all, long time listener, first time caller. I have a Friedland visiocam 46603pl, 2.4 ghz wireless monitor, ed1. \It has 2 units, the doorbell with the camera and the remote video screen which will show video of person who pressed on the doorbell for 30 seconds. I would like to tweak the...

Hi, I have a cat so don't want PIRs but I intend just to fit several door/window contacts, a bell box and a control panel. Something simple that makes a noise on site is all because my neighbours are good and would respond, plus I'm likely to be in if it's night time anyway. What would you...

Hello all, I'm looking at installing a wireless alarm, I know a wired version is better but its just not convenient for me to start lifting carpets and floorboards hence the wireless choice. I'm not looking to install a cheap system, I just want a good one. The three I have read most about...

Hi Recently moved into a property which has these devices. First time I've come across wireless thermostat and not entirely sure how they all interact with each other. Problem I have is there is nothing on the digital display screen on the boiler. Blue light is lit up and have hot water /...

Hi folks, Just moved into a new home where we've inherited an unmonitored ADT fitted Galaxy 2-12. Upon setting the alarm we are met with a "comms failure" failure message, which we must bypass before being able to set the alarm. I have no engineers code, so looks like my only choice is to...

Hi guys, Its my first time here and its great to see the amount of information you can find just by browsing DIYNOT. I've been reading a lot about the problem that i am facing and i've seen there were very close to similar posts on here but nothing was like mine, at least i could not find it...

Happy new year everyone. - I have one of these old Drayton wireless Digistat RF1 is there any way to make the transmitter go all the way down to 5 degrees centigrade at all (documented or not documented, or taken apart and 'hacked' with shorting out something inside) the lowest I can get it to...

Hi forum I would like a little advice. just bought a house and all it has to control the heating is a dial-based unit in the corner of the kitchen. there is no thermostat (other than the throughput on one the oil-burner itself out in the garage). So with no thermostat in the house, and just...